How To Disassemble A Pool Table For Moving

Moving with a pool table? There's a good gamble that you're going to need to have it apart and put information technology back together. Standard pool tables are incredibly big and heavy, making it pretty difficult to move them in i piece—even for a professional moving visitor. Then how do yous do information technology? In this post, we'll comprehend all of the general communication you need to know in order to disassemble and reassemble a pool table so that you'll be ready to proceed moving day.

Annotation: Keep in mind that these directions apply to a standard, forest-framed pool tabular array with drop pockets and a slate bed. If you lot're trying to disassemble and reassemble a pool table of a unlike variety, you'll need to find a guide for that specific type.

Important Safe Tips Before You Disassemble and Reassemble a Pool Tabular array

Safety is important when taking apart whatever piece of furniture, and that goes double for something with equally many heavy parts as a puddle tabular array. To make sure that you are properly protected, habiliment heart protection during the disassembly and reassembly process and accept a helper on mitt to aid with whatsoever heavy lifting.

How to Disassemble a Pool Table

It's really not that hard to dissemble a pool tabular array if you lot become into it knowing what to expect.  Follow the steps beneath to do it right.

1. Get together your supplies
   

   Here'due south what you'll demand in order to disassemble a pool table:

   • Flathead screwdriver or needle nose pliers
   • Wrench
   • Drill with a screwdriver chip

   And don't forget your center protection, as well!

2. Take out the staples that are securing the pockets
   

   Lying on your back, apply your flathead screwdriver or a pair of needle nose pliers to carefully remove the staples that are used to concord the drop pockets in identify. This is when your center protections is actually important, since these staples can easily autumn in one case you dislodge them.

   After all of the staples are removed and the pockets are off, stick the pockets in a packing box and set up aside.

3. Unscrew (and pocketbook) the side rail bolts
   

   Your side by side step is going to be to remove the side rails. Accept your wrench and remove the bolts that are keeping it in place. At that place are usually 3 bolts per rail. Depending on how your pool table is fix upwards, your side runway may exist in one slice or multiple pieces. Exist careful as you lot unscrew the concluding of the bolts so that you tin gently remove the side rail or rails from the tabular array. And so handbag the screws so you lot will be able to locate them hands afterwards on when y'all go to reassemble the puddle table, and set the side rails bated somewhere safe.

4. Remove the felt
   

   One of the more time intensive steps of disassembling a pool tabular array is removing the felt, simply you'll accept to do it in social club to get to the slate bed underneath (which, depending on your pool tabular array'due south fix up, may demand to be taken apart into separate pieces—y'all won't know until you lot take off the felt).

   The felt surface of a pool table is secured to the slate bed in 1 of two means: glue or staples. Work slowly equally you remove it to make certain zilch tears, unless your felt is worn out and you intend on replacing it after your motility anyway.

   If the felt is glued on — Start at one corner and very gently start pulling the felt off of the slate in a slow, backward motility. Utilise extra care when pulling the felt up around the pockets.

   If the felt is stapled on — Apply your flathead screwdriver or needle olfactory organ pliers to remove the staples belongings the felt in place.

   Once the felt is removed, fold information technology as neatly equally possible and set aside.

5. Remove the slate
   

   This step is when it's extra of import to take a helper, since the slate bed on your pool tabular array can weigh every bit much as 450 pounds if information technology'due south all in one piece, or be composed of split pieces weighing anywhere from 150 to 200 pounds each. That's a lot to lift on your own.

   Of course, before you lift the slate you need to remove the screws. Using your drill fitted with a screwdriver bit, take out each spiral holding it in identify. Generally, yous'll find one spiral in each corner of the slate, though in that location may be additional screws running downward its middle. Note that some manufacturers encompass these screws in a beeswax coating, which can brand them a scrap tricky to spot and remove. If you practise find that to exist the case, scrape off the beeswax with your flathead screwdriver before removing them.

   After all the screws are out, elevator the slate bed off the master body of the pool table and prepare aside. Bag upward the screws so you can find them later.

6. Remove the legs
   

   Your last footstep in disassembling a pool tabular array is to remove the legs. This should be a simple task, since they're normally just screwed into the torso, though y'all may need to remove a couple basics to unsecure them. If there are nuts, bag them up.

How to Reassemble a Puddle Table

After your move it's fourth dimension to put your pool tabular array back together. You'll mostly just work backwards from the steps above. Here's how.

1. Gather your supplies—and your parts
   

   Offset with the basics again: a wrench, a screwdriver, a drill with a screwdriver chip, eye protection, and a friendly actress set of easily. You'll want a level, too. In improver to getting your supplies together, as well gather all of the component parts of your pool table and place them in the room where you intend to get together the slice. Gather information technology in the room where it will be living and then that you don't have to attempt to lift the whole thing after it's complete.

2. Screw the legs on
   

   Reattach the legs to the body by screwing them in and, if necessary, securing them in place with the nuts you lot removed in the disassembly process.

3. Reattach the slate bed
   

   Later on the legs are back on the principal body it's time to place the slate bed back within its frame. How exactly yous do this depends on if y'all take one slate piece or a few. If you have three pieces, place the middle one on first to ensure that the frame maintains its remainder. After your slate is down, utilise your level to make sure that everything is straight, then take your drill and spiral the slate dorsum down.

4. Reattach the felt
   

   If you saved your felt, now is the time to unfold it, align it, and secure it in place. How you lot secure information technology once again depends on how it was secured before, but regardless of which way you lot go, take a clean microfiber textile commencement and wipe downwardly the slate to ensure yous're working with a clean and flat surface.

   If it was glued — Apply designated pool table felt adhesive (such as 3M Super 77 Glue) and go portion by portion spraying the glue on and securing the felt down to the slate. Wait a couple minutes between each portion to requite it time to set, and exist sure to proceed the felt equally polish every bit possible as you become, since any bunching or wrinkling will require yous to commencement over (and may require a new piece of felt).

   It was stapled on — Re-staple the felt in the same places that information technology was stapled before. Again, check for smoothness equally you get.

5. Re-secure the side rails
   

   Put the rails back in place and use your wrench to re-secure the bolts.

6. Reaffix the drib pockets
   

   Your last step is going to be to re-staple to drop pockets in on the side rails. As you did when you took them out, practise this from the underside of the tabular array and be sure to wear proper eye protection.

And there yous go! Take your fourth dimension when reassembling your pool tabular array so that it's all done correctly—you'll probably need about two to three hours. And if you lot need any aid when it comes to how to detach and reassemble a pool table—especially if you don't think you're up to the task of doing information technology yourself—bring on a professional for the job. Y'all desire to be sure it'due south someone who has experience, and so look for local puddle table installers and go a couple quotes so you can exist sure to go a good deal.

Laura Mueller is a professional writer with nearly five years of experience writing about moving. She is particularly interested in topics around arrangement, home design, and real estate, and definitely has a few tricks up her sleeve after moving 8 times in eight years during her 20s. Laura believes that moving should be as stress-costless of an feel as possible, and is e'er working on new tips and shortcuts that she can share with readers on Moving.com.View all posts by Laura Mueller

Source: https://www.moving.com/tips/how-to-disassemble-and-reassemble-a-pool-table/

Share this post